![]() ![]() It should show a public IP address has been assigned. ![]() The light on the front of the Base Station should now be green and you can confirm all is okay by opening the Airport Utility once more and clicking on the Airport Extreme. Once complete it will tell you its now available. It will now configure the device with the options. No password is required but the Base Station will insist one is entered. In the password field just hit the spacebar. If all is well then It will now ask to configure the WAN. If you get a screen appear like below then check the WAN cable is firmly plugged in. Enter your information into it then click next. Once selected it will come up with a prompt for you to set it up. If not click Other Airport Base Stations and select your one. Once opened it should pick up the reset station and prompt you to set it up. This can be found in Applications\Utilities. Once reset open up Airport Utility on your mac. The reset button is circled in red below. To do this make sure the Base Station is turned on and then hold in the reset button until the light at the front goes orange and flashes. Now plug a network cable from one of the other ports on the back of the Base Station to your mac.įor Ease so your at the same level as me I would recommend resetting the Base Station back to factory defaults. ![]() You should have the WAN cable going from the BT Openreach modem box which is pictured at the top to the WAN port of the Apple Airport Extreme Base Station which is below. The end result should be the same as below. I have circled the correct port in the picture below. Unplug the cable from the red port and then plug it into the WAN port on the Apple Airport Extreme Base Station. I’ve included a picture of the back for your reference The BT infinity WAN port is labelled as BT Infinity and coloured Red. Why BT didn’t choose to make all of them gigabit is beyond me.įirst of all we are going to need to plug unplug the WAN cable from the BT Homehub and place it into the WAN port on the Airport Base Station. The main gripe for me with the BT Homehub is that it only has 1 Gigabit port on it. This is possible and I thought I would make a quick guide on how to achieve this. If you have configuration instructions from an ISP, or just want to configure your internet and Wi-Fi connection yourself, see the following topics:Ĭonnect to the internet using a static IP addressĭetailed information about wireless networking, including a variety of support articles and a PDF of the setup guide that came with your base station, is available on the AirPort Support website.Īfter you complete the setup process, you have additional options for configuring your network.I have seen on the internet a few questions with regards to replacing the standard issued BT Homehub with an Apple Airport Extreme Base Station. If you want to set up your network using different settings, tap Other Options. If no network is found, the setup assistant creates a new network if a network is already set up, the setup assistant extends the existing network (see Extend an existing Wi-Fi network). ![]() The setup assistant automatically provides the best solution for your network. On your device, go to Settings > Wi-Fi, then tap the name of your base station (for example, “AirPort Extreme 0affff”) listed under “Set up new AirPort base station.” If you forget your AirPort base station, Time Capsule, or Wi-Fi password.If your base station’s light is flashing.Items that can interfere with a Wi-Fi network.Erase and restore your base station or Time Capsule.Change your base station’s name and password.Change your Wi-Fi network’s name, password, and settings.Download AirPort Utility for iPhone, iPad, or iPod touch.Export and import base station settings.Cables you can connect to your base station. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |